Bitmain Antminer L11 Hydro 2U 35GH/s Scrypt Miner
The Bitmain Antminer L11 Hydro 2U is a hydro-cooled ASIC cryptocurrency miner listed with a hashrate of 35 GH/s and power consumption of 5,775W. It uses the Scrypt algorithm, which supports mining Litecoin (LTC) and Dogecoin (DOGE), subject to the miner’s supported configuration and current network requirements.
Designed for installations with compatible liquid-cooling infrastructure, the Antminer L11 Hydro 2U features an Ethernet connection and coolant specifications intended for controlled thermal management. Its high power demand and liquid-cooling requirements make it important to verify electrical capacity, coolant compatibility, and installation conditions before purchasing.
Key Features of the Antminer L11 Hydro 2U
- Manufacturer: Bitmain
- Model: Antminer L11 Hydro 2U
- Mining algorithm: Scrypt
- Listed hashrate: 35 GH/s
- Power consumption: 5,775W
- Calculated efficiency: Approximately 165 J/GH, equivalent to 0.165 J/MH
- Cooling system: Hydrocooling
- Network connection: RJ45 Ethernet 10/100M
- Listed input voltage: 380–415V; verify the exact model requirements
- Coolant pipe connector: OD14 mm, as supplied
Bitmain Antminer L11 Hydro 2U Specifications
| Manufacturer | Bitmain |
|---|---|
| Model | Antminer L11 Hydro 2U |
| Algorithm | Scrypt |
| Hashrate | 35 GH/s (as provided) |
| Power Consumption | 5,775W |
| Energy Efficiency | Approximately 165 J/GH (calculated) |
| Dimensions Without Packaging | 509 × 481 × 87 mm (verify model-specific dimensions) |
| Dimensions With Packaging | 710 × 640 × 220 mm (verify model-specific dimensions) |
| Net Weight | 19.1 kg (verify model-specific weight) |
| Cooling | Hydrocooling |
| Input Voltage | 380–415V (as supplied; verify phase and electrical requirements) |
| Network Connection | RJ45 Ethernet 10/100M |
| Maximum Coolant Pressure | ≤ 3.5 bar |
| Coolant Pipe Connector | OD14 mm |
| Working Coolants | Antifreeze, pure water, or deionized water, subject to manufacturer instructions |
| Antifreeze Coolant pH | 7.0–9.0 |
| Pure Water pH | 6.5–7.5 |
| Deionized Water pH | 8.5–9.5 |
| Coolant Temperature | 20–50°C, as supplied; confirm whether this refers to coolant inlet temperature |
| Storage Temperature | −40–70°C (verify model-specific range) |
| Humidity | 10–90% (confirm non-condensing conditions) |
| Warranty | 180 days, as supplied; confirm applicable coverage and terms |
Litecoin and Dogecoin Mining
The Antminer L11 Hydro 2U uses the Scrypt mining algorithm, which is used by Litecoin and Dogecoin. Scrypt miners may support merged mining of both networks when configured with a compatible mining pool. Confirm the exact coins and pool configuration supported by your unit before operation.
Hydrocooling and Electrical Requirements
This hydro-cooled miner requires a compatible liquid-cooling system. The supplied specifications list a maximum coolant pressure of 3.5 bar and coolant options that include antifreeze, pure water, and deionized water. Coolant pH, flow rate, temperature, pipe connections, and heat-rejection capacity should follow the manufacturer’s installation instructions.
With power consumption listed at 5,775W, the miner also requires an appropriately rated electrical installation. Confirm the required voltage, number of phases, current capacity, power connector, and facility cooling setup before connecting the hardware.
Is the Antminer L11 Hydro 2U Right for Your Mining Operation?
When evaluating the Bitmain Antminer L11 Hydro 2U, compare its verified hashrate, power consumption, electricity costs, cooling requirements, and supported mining networks. Actual mining returns depend on network difficulty, coin prices, pool fees, electricity rates, and uptime. Profitability is not guaranteed.
Shop responsibly at MineYourWealth: Confirm the exact model, product availability, specifications, and warranty terms before placing an order.
Reviews
There are no reviews yet.